Big Bag Discharger BagBoy Hatch
The BagBoy Hatch Big Bag Discharger is designed for Type B outlet spout bags and includes a forklift yoke for lifting with a forklift.
The bag support has a robust design with sloped sides that support the bag, facilitate emptying, and allow the use of a vibrator during discharge to ensure the bag empties completely and smoothly. During emptying, the bag is partially supported by the bag support and partially suspended in the hoist yoke for optimal results.
A tube/hatch assembly provides access to the bag spout. The tube and hatch are adapted to the specific bag to minimize dust emissions. The tube diameter is slightly smaller than the outlet spout diameter, and the outlet spout is at least 10 cm below the hatch in the raised position. Includes handle for locking the hatch.
An electric or pneumatic vibrator ensures a consistent flow. Vibration dampers are installed between the discharge cone and the frame.
The discharger has a robust floor stand and a flanged connection for downstream equipment. The forklift yoke is designed for 4-loop bags.
Specifications
-
Manual slide gate: Ø250 mm at the bottom of the discharger
-
Height from floor to outlet: 600 mm
-
Electrical supply: 230/400 V, 50 Hz (motor power may vary)
-
Material: Carbon steel S355 or equivalent; product-contact parts in stainless steel 1.4301 or equivalent
-
Surface treatment: Carbon steel primed 60 μm and machine enamel 60 μm, RAL 7001 (color selectable at order)
Suitable Bag Type
-
Dimensions (L × W × H): 910 × 1110 × 1600 mm
-
4-loop bag, 1000 kg
-
Lift height: 1900 mm
-
Outlet spout: Ø400 mm, L = 500 mm
-
Lift loop length: 350 mm
Note: Not ATEX certified
